Services - EMS System

Monitor

A complete range of advanced EMS Solutions to Provide the real benefit of Centralized monitoring of all electrical and non-electrical parameters for efficient management of the entire system

• Real time monitoring of an installation via web technologies
• Aid preventive and corrective maintenance of the installation ensuring continuity of service.
• The range includes simple solutions, web enabled energy management systems and advanced EMS Software including WAGES(Water, Air, Gas, Electricity, Stream) and GHG calculations
• Seemless integration with 3rd Party EMS, BMS, ECS, DCS, DMS, Scada, Business Systems and so on.

• 

• Reactive power compensation system is defined, the phase angle difference between voltage and currentwaveforms
• If ,the phase angle difference is high in between the voltage and current the Electrical power loss will go high
• To , eliminate the power loss in electrical network ;we need to compensate the reactive power as per load requirement so,that this is not ready made product.As per the clients load requirement we need to design the system.
• Before designing the system ,the complete power quality analyzing has to be done

1. Fixed type reactive power compensation system; This method can be used only in constant load system
2. Automatic Reactive power compensation system (APFC Automatic power factor control system) using by electro mechanic switch. This method can by used at low level variable linear load.
3. Automatic Reactive power compensation system (APFC Automatic power factor control system ) using by solid state switch (Thyristor controlled ) This method can by used for very high variable load.
4. Automatic Reactive power compensation system with passive harmonics filter system (APFC Automatic power factor control system) using by eletro mechanic switch. This method can by used at low level variable non linear load.
5. Automatic Reactive power compensation system with passive harmonice filters system (APFC Automatic power factor control system) using by solid state switch ( Thyristor controlled ).This method can by using for very high variable non linear load.
6. Phase to phase Automatic Reactive power compensation system with passive harmonics filters system ( APFC Automatic power factor control system ) using by solid state switch ( Thyristor controlled ).This method can be used for unbalance three phase load system.
7. Single phase Automatic Reactive power compensation system with passive harmonics filters system (APFC Automatic power factor control system) using by solid state switch ( Thyristor controlled). This method can used for single phase 440 v system.
8. Triple line harmonics filter .Here, we have to use delta to star method isolation transformer.
9. Active Harmonics filter. This can be used where less reactive power compensation require.